dmesg - EVGA SR2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.10-7-desktop (geeko@buildhost) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #1 SMP PREEMPT Mon Feb 3 09:41:24 UTC 2014 (750023e)
Command line: BOOT_IMAGE=/vmlinuz-3.11.10-7-desktop root=/dev/mapper/system-root video=1024x768 resume=/dev/system/swap splash=silent quiet showopts elevator=noop
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bd77ffff] usable
BIOS-e820: [mem 0x00000000bd780000-0x00000000bf78ffff] reserved
BIOS-e820: [mem 0x00000000bf790000-0x00000000bf79dfff] ACPI data
BIOS-e820: [mem 0x00000000bf79e000-0x00000000bf7cffff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
BIOS-e820: [mem 0x00000000bf7e7000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000063fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./EVGA Classified SR-2, BIOS 080016 04/24/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x640000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D7FFF write-protect
D8000-DFFFF uncachable
E0000-E3FFF write-protect
E4000-E7FFF write-through
E8000-EBFFF write-protect
EC000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FC00000000 write-back
1 base 0400000000 mask FE00000000 write-back
2 base 0600000000 mask FFC0000000 write-back
3 base 00C0000000 mask FFC0000000 uncachable
4 base 00BF800000 mask FFFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fb4000, 0x01fb4fff] PGTABLE
BRK [0x01fb5000, 0x01fb5fff] PGTABLE
BRK [0x01fb6000, 0x01fb6fff] PGTABLE
init_memory_mapping: [mem 0x63fe00000-0x63fffffff]
[mem 0x63fe00000-0x63fffffff] page 2M
BRK [0x01fb7000, 0x01fb7fff] PGTABLE
init_memory_mapping: [mem 0x63c000000-0x63fdfffff]
[mem 0x63c000000-0x63fdfffff] page 2M
init_memory_mapping: [mem 0x600000000-0x63bffffff]
[mem 0x600000000-0x63bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbd77ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbd5fffff] page 2M
[mem 0xbd600000-0xbd77ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x5ffffffff]
[mem 0x100000000-0x5ffffffff] page 2M
BRK [0x01fb8000, 0x01fb8fff] PGTABLE
BRK [0x01fb9000, 0x01fb9fff] PGTABLE
RAMDISK: [mem 0x35016000-0x36802fff]
ACPI: RSDP 00000000000f9f70 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf790100 00054 (v01 042413 XSDT1438 20130424 MSFT 00000097)
ACPI: FACP 00000000bf790290 000F4 (v04 042413 FACP1438 20130424 MSFT 00000097)
ACPI: DSDT 00000000bf7904f0 058A3 (v02 1W555 1W555A58 00000A58 INTL 20051117)
ACPI: FACS 00000000bf79e000 00040
ACPI: APIC 00000000bf790390 00118 (v02 042413 APIC1438 20130424 MSFT 00000097)
ACPI: MCFG 00000000bf7904b0 0003C (v01 042413 OEMMCFG 20130424 MSFT 00000097)
ACPI: OEMB 00000000bf79e040 00082 (v01 042413 OEMB1438 20130424 MSFT 00000097)
ACPI: DMAR 00000000bf79e0d0 00118 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 00000000bf79e5b0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
Initmem setup node 0 [mem 0x00000000-0x63fffffff]
NODE_DATA [mem 0x63ffd7000-0x63ffeafff]
[ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627600000-ffff88063c5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x63fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xbd77ffff]
node 0: [mem 0x100000000-0x63fffffff]
On node 0 totalpages: 6280988
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 10555 pages used for memmap
DMA32 zone: 771968 pages, LIFO batch:31
Normal zone: 75264 pages used for memmap
Normal zone: 5505024 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 24 CPUs, 16 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbd780000-0xbf78ffff]
PM: Registered nosave memory: [mem 0xbf790000-0xbf79dfff]
PM: Registered nosave memory: [mem 0xbf79e000-0xbf7cffff]
PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff]
PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7e6fff]
PM: Registered nosave memory: [mem 0xbf7e7000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:24 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88063f200000 s83584 r8192 d22912 u131072
pcpu-alloc: s83584 r8192 d22912 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6195092
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.10-7-desktop root=/dev/mapper/system-root video=1024x768 resume=/dev/system/swap splash=silent quiet showopts elevator=noop
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 24670040K/25123952K available (5831K kernel code, 772K rwdata, 4344K rodata, 1340K init, 1640K bss, 453912K reserved)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=24.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-511.
NR_IRQS:33024 nr_irqs:1280 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 100663296 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 3321.310 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6642.62 BogoMIPS (lpj=3321310)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 24K (ffffffff81e12000 - ffffffff81e18000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
dmar: Host address width 40
dmar: DRHD base: 0x000000fbffe000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020f6
dmar: RMRR base: 0x000000000ec000 end: 0x000000000f4fff
dmar: RMRR base: 0x000000bf7e7000 end: 0x000000bf7fffff
dmar: ATSR flags: 0x0
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X5550 @ 2.67GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
Brought up 8 CPUs
smpboot: Total of 8 processors activated (53140.96 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbf79e000-0xbf7cffff] (204800 bytes)
RTC time: 7:40:38, date: 02/15/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf79e1f0 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 003BA (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000ce800-0x000d53ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 0x10: [mem 0xfec8a000-0xfec8afff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xc980-0xc99f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xca00-0xca1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xca80-0xca9f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf3ff8000-0xf3ff83ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xcb00-0xcb1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xcb80-0xcb9f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xcc00-0xcc1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf3ffa000-0xf3ffa3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xcd00-0xcd07]
pci 0000:00:1f.2: reg 0x14: [io 0xcf00-0xcf03]
pci 0000:00:1f.2: reg 0x18: [io 0xce80-0xce87]
pci 0000:00:1f.2: reg 0x1c: [io 0xce00-0xce03]
pci 0000:00:1f.2: reg 0x20: [io 0xcd80-0xcd9f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf3ffc000-0xf3ffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf3ffe000-0xf3ffe0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:07:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 07-0a]
pci 0000:00:03.0: bridge window [io 0xd000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xf7f00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:08:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:02.0: [10de:05b1] type 01 class 0x060400
pci 0000:08:02.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: PCI bridge to [bus 08-0a]
pci 0000:07:00.0: bridge window [io 0xd000-0xefff]
pci 0000:07:00.0: bridge window [mem 0xf7f00000-0xfbefffff]
pci 0000:07:00.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:0a:00.0: [10de:1180] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xf8000000-0xf8ffffff]
pci 0000:0a:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:0a:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
pci 0000:0a:00.0: reg 0x24: [io 0xef80-0xefff]
pci 0000:0a:00.0: reg 0x30: [mem 0xfbe00000-0xfbe7ffff pref]
pci 0000:0a:00.1: [10de:0e0a] type 00 class 0x040300
pci 0000:0a:00.1: reg 0x10: [mem 0xfbefc000-0xfbefffff]
pci 0000:08:00.0: PCI bridge to [bus 0a]
pci 0000:08:00.0: bridge window [io 0xe000-0xefff]
pci 0000:08:00.0: bridge window [mem 0xf8000000-0xfbefffff]
pci 0000:08:00.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:09:00.0: [1000:0073] type 00 class 0x010400
pci 0000:09:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:09:00.0: reg 0x14: [mem 0xf7f9c000-0xf7f9ffff 64bit]
pci 0000:09:00.0: reg 0x1c: [mem 0xf7fc0000-0xf7ffffff 64bit]
pci 0000:09:00.0: reg 0x30: [mem 0xf7fa0000-0xf7fbffff pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:08:02.0: PCI bridge to [bus 09]
pci 0000:08:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:08:02.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:02:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 02-06]
pci 0000:00:07.0: bridge window [mem 0xf4000000-0xf7efffff]
pci 0000:03:00.0: [10de:05b1] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:01.0: [10de:05b1] type 01 class 0x060400
pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
pci 0000:03:02.0: [10de:05b1] type 01 class 0x060400
pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-06]
pci 0000:02:00.0: bridge window [mem 0xf4000000-0xf7efffff]
pci 0000:03:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: [1678:0100] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xf7eef000-0xf7eeffff 64bit]
pci 0000:05:00.0: reg 0x18: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:05:00.0: reg 0x30: [mem 0xf7ef0000-0xf7efffff pref]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:01.0: bridge window [mem 0xf4000000-0xf7efffff]
pci 0000:03:02.0: PCI bridge to [bus 04]
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0a:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
PCI: root bus fe: using default resources
PCI: Probing PCI hardware (bus fe)
PCI host bridge to bus 0000:fe
pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbd780000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0a00-0x0adf] has been reserved
system 00:05: [io 0x0ae0-0x0aef] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] could not be reserved
system 00:06: [io 0x0500-0x057f] could not be reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:09: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:08:00.0: PCI bridge to [bus 0a]
pci 0000:08:00.0: bridge window [io 0xe000-0xefff]
pci 0000:08:00.0: bridge window [mem 0xf8000000-0xfbefffff]
pci 0000:08:00.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:08:02.0: PCI bridge to [bus 09]
pci 0000:08:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:08:02.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:07:00.0: PCI bridge to [bus 08-0a]
pci 0000:07:00.0: bridge window [io 0xd000-0xefff]
pci 0000:07:00.0: bridge window [mem 0xf7f00000-0xfbefffff]
pci 0000:07:00.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 07-0a]
pci 0000:00:03.0: bridge window [io 0xd000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xf7f00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: PCI bridge to [bus 06]
pci 0000:03:01.0: PCI bridge to [bus 05]
pci 0000:03:01.0: bridge window [mem 0xf4000000-0xf7efffff]
pci 0000:03:02.0: PCI bridge to [bus 04]
pci 0000:02:00.0: PCI bridge to [bus 03-06]
pci 0000:02:00.0: bridge window [mem 0xf4000000-0xf7efffff]
pci 0000:00:07.0: PCI bridge to [bus 02-06]
pci 0000:00:07.0: bridge window [mem 0xf4000000-0xf7efffff]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xf7f00000-0xfbefffff]
pci_bus 0000:07: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xd000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xf7f00000-0xfbefffff]
pci_bus 0000:08: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xf8000000-0xfbefffff]
pci_bus 0000:0a: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf7efffff]
pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf7efffff]
pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf7efffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:0a:00.0: Boot video device
PCI: CLS 256 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 24500K (ffff880035016000 - ffff880036803000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9780000-0xbd780000] (64MB) mapped at [ffff8800b9780000-ffff8800bd77ffff]
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1392450038.385:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
pcieport 0000:00:03.0: irq 64 for MSI/MSI-X
pcieport 0000:00:07.0: irq 65 for MSI/MSI-X
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcieport 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:08:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
pci 0000:0a:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:08:02.0: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:03:01.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:03:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:13.0 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd7000000, mapped to 0xffffc90013700000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 66 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc100 irq 66
ata2: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc180 irq 66
ata3: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc200 irq 66
ata4: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc280 irq 66
ata5: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc300 irq 66
ata6: SATA max UDMA/133 abar m2048@0xf3ffc000 port 0xf3ffc380 irq 66
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf3ff8000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.10-7-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3ffa000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.10-7-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c980
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.10-7-desktop uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000ca00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.10-7-desktop uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ca80
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.10-7-desktop uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cb00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.11.10-7-desktop uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cb80
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.11.10-7-desktop uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cc00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.11.10-7-desktop uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
Key type dns_resolver registered
PM: Checking hibernation image partition /dev/system/swap
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-3: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 3321.684 MHz
usb 1-3: New USB device found, idVendor=125f, idProduct=c08a
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: ADATA USB Flash Drive
usb 1-3: Manufacturer: ADATA
usb 1-3: SerialNumber: 1282917222200046
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 4-2: new full-speed USB device number 2 using uhci_hcd
usb 4-2: device descriptor read/64, error -71
ata4: SATA link down (SStatus 0 SControl 300)
usb 4-2: device descriptor read/64, error -71
Switched to clocksource tsc
usb 4-2: new full-speed USB device number 3 using uhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
usb 4-2: device descriptor read/64, error -71
ata6: SATA link down (SStatus 0 SControl 300)
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 2:973:672
rtc_cmos 00:02: setting system clock to 2014-02-15 07:40:41 UTC (1392450041)
Freeing unused kernel memory: 1340K (ffffffff81cc3000 - ffffffff81e12000)
Write protecting the kernel read-only data: 12288k
usb 4-2: device descriptor read/64, error -71
Freeing unused kernel memory: 304K (ffff8800015b4000 - ffff880001600000)
Freeing unused kernel memory: 1800K (ffff880001a3e000 - ffff880001c00000)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
alua: device handler registered
emc: device handler registered
hp_sw: device handler registered
rdac: device handler registered
systemd-udevd[228]: starting version 208
megasas: 06.600.18.00-rc1 Wed. May. 15 17:00:00 PDT 2013
megasas: 0x1000:0x0073:0x1014:0x03b1: bus 9:slot 0:func 0
megasas: FW now in Ready state
megaraid_sas 0000:09:00.0: irq 67 for MSI/MSI-X
megaraid_sas 0000:09:00.0: [scsi6]: FW supports MSIX vector,Online CPUs: ,Current MSIX
megasas_init_mfi: fw_support_ieee=67108864
megasas: INIT adapter done
megaraid_sas 0000:09:00.0: Controller type: iMR
scsi6 : LSI SAS based MegaRAID driver
scsi 6:0:15:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
scsi 6:0:16:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
scsi 6:0:17:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
scsi 6:0:18:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
scsi 6:2:0:0: Direct-Access IBM ServeRAID M1015 2.13 PQ: 0 ANSI: 5
sd 6:2:0:0: [sda] 492183552 512-byte logical blocks: (251 GB/234 GiB)
sd 6:2:0:0: [sda] Write Protect is off
sd 6:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 6:2:0:0: [sda] Write cache: disabled, read cache: disabled, supports DPO and FUA
sda: sda1 sda2
sd 6:2:0:0: [sda] Attached SCSI disk
usb 4-2: new full-speed USB device number 4 using uhci_hcd
usb 4-2: device not accepting address 4, error -71
usb 4-2: new full-speed USB device number 5 using uhci_hcd
usb 4-2: device not accepting address 5, error -71
hub 4-0:1.0: unable to enumerate USB device on port 2
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU0 updated to revision 0x19, date = 2013-06-21
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU1 updated to revision 0x19, date = 2013-06-21
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU2 updated to revision 0x19, date = 2013-06-21
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU3 updated to revision 0x19, date = 2013-06-21
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU4 updated to revision 0x19, date = 2013-06-21
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU5 updated to revision 0x19, date = 2013-06-21
microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU6 updated to revision 0x19, date = 2013-06-21
microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x15
microcode: CPU7 updated to revision 0x19, date = 2013-06-21
md: linear personality registered for level -1
usb 5-1: new low-speed USB device number 2 using uhci_hcd
usb 5-1: New USB device found, idVendor=04b3, idProduct=3025
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB NetVista Full Width Keyboard.
usb 5-1: Manufacturer: LITE-ON Technology
input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input0
hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:1a.2-1/input0
bio: create slab at 1
bio: create slab at 1
xor: measuring software checksum speed
prefetch64-sse: 13616.000 MB/sec
generic_sse: 11996.000 MB/sec
xor: using function: prefetch64-sse (13616.000 MB/sec)
raid6: sse2x1 8195 MB/s
raid6: sse2x2 9628 MB/s
raid6: sse2x4 10777 MB/s
raid6: using algorithm sse2x4 (10777 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab at 2
Btrfs loaded
device fsid 15b31f83-4f2e-4545-acf5-4cb62b623f25 devid 1 transid 127 /dev/mapper/system-home
device fsid 5c0e06df-8dfd-4112-835f-d69ed96689b5 devid 1 transid 337 /dev/mapper/system-root
device fsid 15b31f83-4f2e-4545-acf5-4cb62b623f25 devid 1 transid 127 /dev/dm-1
device fsid 5c0e06df-8dfd-4112-835f-d69ed96689b5 devid 1 transid 337 /dev/dm-2
PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
PM: Marking nosave pages: [mem 0xbd780000-0xffffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
PM: Starting manual resume from disk
PM: Hibernation image partition 253:3 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
device fsid 5c0e06df-8dfd-4112-835f-d69ed96689b5 devid 1 transid 337 /dev/mapper/system-root
btrfs: disk space caching is enabled
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
LVM: Activation generator successfully completed.
systemd[1]: Starting Collect Read-Ahead Data...
systemd[1]: Starting Replay Read-Ahead Data...
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Create dynamic rule for /dev/root link...
systemd[1]: Starting LSB: Set default boot entry if called...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journald[473]: Vacuuming done, freed 0 bytes
sd 6:2:0:0: Attached scsi generic sg0 type 0
systemd-udevd[506]: starting version 208
btrfs: disk space caching is enabled
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:fe:03.0
EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
input: PC Speaker as /devices/platform/pcspkr/input/input3
iw_nes: NetEffect RNIC driver v1.5.0.1 loading. (0000:05:00.0)
iw_nes: Firmware version 3.13
iw_nes: PAU is not supported.
iw_nes: EEPROM version 3.13
netif_napi_add() called with weight 128 on device eth%d
iw_nes: 0000:05:00.0: NetEffect RNIC driver successfully loaded.
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi7 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
vgaarb: device changed decodes: PCI:0000:0a:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.117 Tue Nov 26 21:25:36 PST 2013
hda_intel: Disabling MSI
ALSA hda_intel.c:3116 0000:0a:00.1: Handle VGA-switcheroo audio client
ALSA hda_intel.c:3593 0000:0a:00.1: Disabling 64bit DMA
ALSA hda_intel.c:1748 0000:0a:00.1: Enable delay in RIRB handling
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
gpio_ich: GPIO from 195 to 255 on gpio_ich
device fsid 5c0e06df-8dfd-4112-835f-d69ed96689b5 devid 1 transid 338 /dev/dm-2
systemd-udevd[516]: renamed network interface eth0 to enp5s0
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:07:00.0/0000:08:00.0/0000:0a:00.1/sound/card0/input4
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:07:00.0/0000:08:00.0/0000:0a:00.1/sound/card0/input5
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:07:00.0/0000:08:00.0/0000:0a:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:07:00.0/0000:08:00.0/0000:0a:00.1/sound/card0/input7
device fsid 15b31f83-4f2e-4545-acf5-4cb62b623f25 devid 1 transid 127 /dev/dm-1
device fsid 15b31f83-4f2e-4545-acf5-4cb62b623f25 devid 1 transid 127 /dev/mapper/system-home
Adding 2097148k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:2097148k FS
btrfs: disk space caching is enabled
systemd-journald[473]: Received request to flush runtime journal from PID 1
type=1400 audit(1392450050.681:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=1087 comm="apparmor_parser"
type=1400 audit(1392450050.687:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=1096 comm="apparmor_parser"
type=1400 audit(1392450050.691:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=1100 comm="apparmor_parser"
type=1400 audit(1392450050.694:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=1104 comm="apparmor_parser"
type=1400 audit(1392450050.699:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=1109 comm="apparmor_parser"
type=1400 audit(1392450050.700:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=1109 comm="apparmor_parser"
type=1400 audit(1392450050.700:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=1109 comm="apparmor_parser"
type=1400 audit(1392450050.700:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=1109 comm="apparmor_parser"
type=1400 audit(1392450050.703:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=1113 comm="apparmor_parser"
type=1400 audit(1392450050.707:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/auth" pid=1117 comm="apparmor_parser"
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
scsi 7:0:0:0: Direct-Access ADATA USB Flash Drive 1100 PQ: 0 ANSI: 4
scsi 7:0:0:0: alua: supports implicit and explicit TPGS
scsi 7:0:0:0: alua: No target port descriptors found
scsi 7:0:0:0: alua: not attached
sd 7:0:0:0: Attached scsi generic sg1 type 0
sd 7:0:0:0: [sdb] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sd 7:0:0:0: [sdb] Attached SCSI removable disk
iw_nes: enp5s0: enabling interface
NET: Registered protocol family 17
Bridge firewalling registered
device enp5s0 entered promiscuous mode
br0: port 1(enp5s0) entered forwarding state
br0: port 1(enp5s0) entered forwarding state
Ebtables v2.0 registered
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 4-2: new full-speed USB device number 6 using uhci_hcd
usb 4-2: New USB device found, idVendor=1e7d, idProduct=2d51
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: ROCCAT Kone[+]
usb 4-2: Manufacturer: ROCCAT
input: ROCCAT ROCCAT Kone[+] as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input8
koneplus 0003:1E7D:2D51.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone[+]] on usb-0000:00:1a.1-2/input0
input: ROCCAT ROCCAT Kone[+] as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input9
koneplus 0003:1E7D:2D51.0003: input,hidraw2: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone[+]] on usb-0000:00:1a.1-2/input1
fuse init (API version 7.22)
BTRFS debug (device dm-2): unlinked 3 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 5 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 2 orphans
BTRFS debug (device dm-2): unlinked 4 orphans
BTRFS debug (device dm-2): unlinked 5 orphans
BTRFS debug (device dm-2): unlinked 4 orphans
BTRFS debug (device dm-2): unlinked 5 orphans